RTCA/DO-160E/F/G , Environmental Conditions and Test Procedures for Airborne Equipment
We can perform every test listed below, here at the same location.In many cases, we can run tests simultaneously throughout our lab to make the most of your visit here should you wish to witness or support your product’s operation during the test program. We can also assist or completely prepare your test plan if you desire.
RTCA/DO-160E/F/G Section 4: Temperature and Altitude
RTCA/DO-160E/F/G Section 5: Temperature Variation
RTCA/DO-160E/F/G Section 6: Humidity
RTCA/DO-160E/F/G Section 7: Operational Shock and Crash Safety
RTCA/DO-160E/F/G Section 8: Vibration
RTCA/DO-160E/F/G Section 9: Explosion Proofness
RTCA/DO-160E/F/G Section 10: Waterproofness
RTCA/DO-160E/F/G Section 11: Fluids Susceptibility
RTCA/DO-160E/F/G Section 12: Sand and Dust
RTCA/DO-160E/F/G Section 13: Fungus Resistance
RTCA/DO-160E/F/G Section 14: Salt Spray
RTCA/DO-160E/F/G Section 15: Magnetic Effect
RTCA/DO-160E/F/G Section 16: Power Input
RTCA/DO-160E/F/G Section 17: Voltage Spike
RTCA/DO-160E/F/G Section 18: Audio Frequency Conducted Susceptibility – Power Inputs
RTCA/DO-160E/F/G Section 19: Induced Signal Susceptibility
RTCA/DO-160E/F/G Section 20: Radio Frequency Susceptibility (Radiated and Conducted)
RTCA/DO-160E/F/G Section 21: Emission of Radio Frequency Energy
RTCA/DO-160E/F/G Section 22: Lightning Induced Transient Susceptibility
RTCA/DO-160E/F/G Section 24: Icing
RTCA/DO-160E/F/G Section 25: Electrostatic Discharge
RTCA/DO-160E/F/G Section 26: Fire, Flammability
This standard defines a series of minimum standard environmental test conditions and applicable test procedures for airborne equipment. The purpose of these tests is to determine the performance characteristics of airborne equipment in environmental conditions representative of those that may be encountered in airborne operation of the equipment.
RTCA/DO160E is published by RTCA, Inc., a global organization comprised of industry and government representatives, which develops standards to assure the safety and reliability of all Airborne Electronics (Avionics). Manufacturers of aircraft electronic equipment selling their products in the United States,Europe, and around the globe must meet RTCA requirements, including RTCA/DO160E/F. The European Organization for Civil Aviation Electronics (EUROCAE) works jointly with RTCA in the development of standards, and publishes an identical document, EUROCAE/ED-14D.If you have this aspect of the test requirements, please send email to me alston.chen@foxmail.com;(Alston Chen)