新能源产品测试
    New Energy Product Test

    动力电池包测试能力
    电性能：室温容量和能量、高温容量和能量、低温容量和能量、功率和内阻测试、无负载容量损失、存储容量损失、能量效率；
    安全性&可靠性：振动试验、机械冲击；
    安全性：跌落、温度冲击、湿热循环、海水浸泡、盐雾、过温、过充电保护、过放电保护；
    循环寿命类：室温容量和能量、室温功率、标准循环寿命、混合动力乘用车功率型蓄电池工况循环寿命、混合动力商用车功率型蓄电池工况循环寿命、纯电动乘用车能量型蓄电池工况循环寿命、纯电动商用车能量型蓄电池工况循环寿命、纯电动乘用车用能量型蓄电池工况循环寿命、插电式和增程式电动车用蓄电池工况循环寿命。

    充电接口及充电桩测试能力
    电动汽车传导充电互操作性测试规范：标准号未定，全部项目可测；
    电动汽车非车载传导式充电机与电池管理系统之间的通信协议一致性测试：GB/T 27930-2015，全部项目可测；
    电动汽车交流充电桩检验技术规范：QGDW1592-2014标准表1中1~14项全部可测；
    电动汽车非车载充电机检验技术规范：QGDW1591-2014标准表1中1~14项全部可测；
    电动汽车充电设备检验试验规范第1部分非车载充电机：NBT 33008.1-2013标准表1中1~14项全部可测。

    其它部品测试能力
    电动汽车用驱动电机系统环境适应性试验：GB/T 18488.2-2015，9.1~9.6项
    电动汽车用电池管理系统：QC/T 897-2011，除EMC外全部项目

    Power battery pack testing capability
    Performance: capacity and energy at room temperature, capacity and energy at room temperature at low temperature, capacity and energy at high temperature, power and resistance test, no load capacity loss, loss of storage capacity and energy efficiency;
    Safety& Reliability: vibration, shock;
    Safety: drop, temperature shock, heat cycle, seawater immersion, salt spray, over temperature, over charging protection, over discharge protection;
    Cycle life: capacity and energy at room temperature, power at room temperature, standard cycle life, high power density battery operating cycle life for hybrid power passenger vehicle, high power density battery operating cycle life for hybrid power commercial vehicle, high energy density battery operating cycle life for pure electric commercial vehicle, high energy density battery operating cycle life for pure electric passenger cars, battery operating cycle life for plug-in and extended-range electric vehicle;

    Testing capability of charging pile and interface
    Test specification for conductive charging interoperability of electric vehicles: all items are testable;
    The communication protocol conformance testing of electric cars on-board conduction type charger and battery management system: GB/T27930-2015(all items are testable);
    Technical specification for inspection of AC charging piles for electric vehicles: QGDW1592-2014(items of 1~14 are testable);
    Non-car charging specification for electric vehicles: QGDW1591-2014(items of 1~14 of figure 1 are testable);
    Part one non-car charger of specification for inspection and testing of electric vehicle charging equipment: NBT 33008.1-2013(items of 1~14 offigure 1 are testable);

    Other testing capability
    Environmental adaptability test of drive motor system for electric vehicle: GB/T 18488.2-2015，9.1~9.6;
    Battery management system for electric vehicle: QC/T 897-2011(all items except EMC are testable);